Supermicro AOC-XEH-IN2 Manual do Utilizador Página 245

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 392
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 244
7-147
Chapter 7: 1/10-Gb Ethernet Switch Firmware
BGP Peer Configuration
Table 7-102. BGP Basic Settings Page Parameters
Parameter Description
Status
This parameter specifies the BGP admin status. Using this, the protocol
can be enabled/disabled in the switch.
AS Number
This parameter specifies the autonomous system to which the switch is
connected, which is a read-only field.
Synchronization
The synchronization between IGP and BGP can be ensured by enabling
this field.
Overlap Router Policy
This parameter represents the policy for handling overlapping routes.
When an overlapping route is received, depending upon the configured
policy, either the less-specific routes or most-specific routes or both are
installed in the RIB tree.
Default Local Preference This parameter sets a preference value for the autonomous system path.
Advertisement of Non-BGP
Routes
You can choose to advertise even the external non-BGP routes by
enabling this feature.
Always Compare MED
By enabling this feature, you can choose to always compare the MED
values of paths from different neighbors for the same prefix, for choosing
the best path.
Figure 7-129. BGP Peer Configuration Page
Vista de página 244
1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 391 392

Comentários a estes Manuais

Sem comentários