Supermicro AOC-XEH-IN2 Manual do Utilizador descarregar pdf (Página 243)

100

101

7-145

Chapter 7: 1/10-Gb Ethernet Switch Firmware

Aggregation Effect

This parameter specifies the Aggreation option as one of the following:

• Advertise – When set to advertise and the associated Area ID is

0.0.0.0, then aggregated Type-5 are generated. Otherwise if

associated Area ID is x.x.x.x (other than 0.0.0.0), then aggregated

Type-7 is generated in NSSA x.x.x.x for the specified range.

• Do Not Advertise – When set to doNotAdvertise (2) and the

associated Area ID is 0.0.0.0, then Type-5 is not generated for the

specified range, while aggregated Type-7 are generated in all

attached NSSA. While associated Area ID is x.x.x.x (other than

0.0.0.0), then Type-7 are not generated in NSSA x.x.x.x for the

specified range.

• Allow All – When set to allowAll and associated Area ID is 0.0.0.0,

then aggregated Type-5 are generated for the specified range. In

addition aggregated Type-7 are generated in all attached NSSA, for

the specified range.

• Deny All – When set to denyAll neither Type-5 nor Type-7 will be

generated for the specified range.

Translation This parameter enables or disables the translation.

Table 7-101. OSPF AS External Aggregation Configuration Page Parameters

Parameter Description

1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 391 392

Comentários a estes Manuais

Sem comentários

Supermicro AOC-XEH-IN2 Manual do Utilizador Página 243

Comentários a estes Manuais

Manuais e produtos relacionados com Placas de rede Supermicro AOC-XEH-IN2