
Superblade Network Modules User’s Manual
7-120
Pool Settings
Clicking the POOL SETTINS link brings up the DHCP POOL SETTINGS page (Figure 7-106),
which allows you to configure the IP address pool that can be used by the DHCP server
to allocate IP addresses. The parameters for this page are shown in Table 7-81.
Figure 7-106. DHCP Pool Settings Page
Table 7-81. DHCP Pool Settings Page Parameters
Parameter Description
Pool ID
This parameter specifies the pool ID to index among the different subnet
pools configured.
Network This parameter specifies the subnet of the IP address in the pool.
Subnet Mask This parameter specifies the subnet mask of the IP address in the pool.
Start IP
This parameter specifies the first IP address in the address pool that is
used for dynamic allocation by the DHCP server.
End IP
This parameter specifies the last IP address in the address pool that is
used for dynamic allocation by the DHCP server.
Lease Time This parameter specifies the time interval for which the IP address is valid.
Utilization Threshold This parameter specifies the DHCP Pool Utilization Threshold value.
Status This parameter specifies the status of the entry.
Comentários a estes Manuais