Supermicro AS-1012G-MTF Manual do Utilizador descarregar pdf (Página 59)

Chapter 5: Advanced Motherboard Setup

5-25

Enabling SATA RAID in the BIOS

Before installing the Windows Operating System, you must change some settings

in BIOS. Boot up the system and hit the <Del> key to enter the BIOS Setup Utlility.

After the Setup Utility loads,

Use the arrow keys to move to the Exit menu. Scroll down with the arrow 4.

keys to the "Load Optimal Defaults setting and press <Enter>. Select "OK" to

conﬁ rm, then <Enter> to load the default settings.

Use the arrow keys to move to the "Advanced" menu, then scroll down to 5.

"Chipset Conﬁ guration". Next enter "SourthBridge Conﬁ guration" and press

the <Enter> key. Once in this submenu, scroll down to "OnChip SATA Type"

and choose the "RAID" option (see Figure 5-7).

Figure 5-7. BIOS Setup Screen

Hit the <Esc> key twice and scroll to the Exit menu. Select "Save Changes 6.

and Exit" and hit <enter>, then hit <Enter> again to verify.

After exiting the BIOS Setup Utility, the system will reboot. When prompted 7.

during the startup, press the <CTRL+A> key when prompted to run the Dot-

Hill RAID Utility program (see Figure 5-8).

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 95 96

Sem comentários

Supermicro AS-1012G-MTF Manual do Utilizador Página 59