Supermicro AS-1012G-MTF Manual do Utilizador descarregar pdf (Página 29)

Chapter 3: System Interface

3-3

Power

Indicates power is being supplied to the system's power supply units. This LED

should normally be illuminated when the system is operating.

3-4 Drive Carrier LEDs

Each drive carrier has two LEDs for its SATA drives.

Green:

• When illuminated, the green LED on the drive carrier indicates drive

activity. A connection to the backplane enables this LED to blink on and off

when that particular drive is being accessed.

Red:

• The red LED to indicate a drive failure. If one of the drives fails, you should

be notiﬁ ed by your system management software. Please refer to Chapter 6 for

instructions on replacing failed drives.

HDD

Channel activity for all HDDs. This light indicates SAS/SATA drive activity on the

1012G-MTF when ﬂ ashing.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 95 96

Sem comentários

Supermicro AS-1012G-MTF Manual do Utilizador Página 29