Supermicro 1012C-MRF Manual do Utilizador descarregar pdf (Página 77)

Chapter 7: BIOS

7-9

 PCI/PnP Conﬁ guration

Clear NVRAM

Select Yes to clear NVRAM during boot-up. The options are Yes and No.

Plug & Play O/S

Select Yes to allow the OS to conﬁ gure Plug & Play devices. (This is not required

for system boot if your system has an OS that supports Plug & Play.) Select No

to allow AMIBIOS to conﬁ gure all devices in the system.

PCI Latency Timer

This option sets the latency of all PCI devices on the PCI bus. Select a value

to set the PCI latency in PCI clock cycles. Options are 32, 64, 96, 128, 160,

192, 224 and 248.

PCI IDE Busmaster

Use this setting to Enable or Disable BIOS enabled uses of PCI Busmastering

for reading or writing to IDE drives.

ROM Scan Ordering

This setting determines which kind of option ROM activates prior to another.

Options include Onboard First and Addon First.

PCI Slot 4

These settings Enable or Disable the speciﬁ ed PCI slot in your system.

PCIE x4 Slot5/PCI x8 Slot 6/PCI x8/x16 Slot 7

These settings Enable or Disable the speciﬁ ed PCIE slot in your system.

Onboard LAN Option ROM Select

This setting allows you to select the onboard LAN option ROM for iSCSI or

PXE.

Note: You must enable ONLY LAN1 when the iSCSI support option is

speciﬁ ed.

Load Onboard LAN 1 Option ROM

This option allows you to enable or disable the onboard LAN 1 option ROM.

Load Onboard LAN 2 Option ROM

This option allows you to enable or disable the onboard LAN 2 option ROM.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 91 92

Sem comentários

Supermicro 1012C-MRF Manual do Utilizador Página 77