Supermicro 1012C-MRF Manual do Utilizador descarregar pdf (Página 76)

7-8

A+ Server 1012C-MRF User's Manual

The options are Auto, 0, 1, 2, 3, and 4. Select Auto to allow BIOS to auto

detect the PIO mode. Use this value if the IDE disk drive support cannot be

determined. Select 0 to allow BIOS to use PIO mode 0, which has a data

transfer rate of 3.3 MBs. Select 1 to allow BIOS to use PIO mode 1, which

has a data transfer rate of 5.2 MBs. Select 2 to allow BIOS to use PIO mode

2, which has a data transfer rate of 8.3 MBs. Select 3 to allow BIOS to use

PIO mode 3, which has a data transfer rate of 11.1 MBs. Select 4 to allow

BIOS to use PIO mode 4, which has a data transfer rate of 16.6 MBs. This

setting generally works with all hard disk drives manufactured after 1999.

For other disk drives, such as IDE CD-ROM drives, check the speciﬁ cations

of the drive.

DMA Mode

Selects the DMA Mode. Options are Auto, SWDMA0, SWDMA1, SWDMA2,

MWDMA0. MDWDMA1, MWDMA2, UDMA0. UDMA1, UDMA2, UDMA3,

UDMA4 and UDMA5. (SWDMA=Single Word DMA, MWDMA=Multi Word

DMA, UDMA=UltraDMA.)

S.M.A.R.T.

Self-Monitoring Analysis and Reporting Technology (SMART) can help predict

impending drive failures. Select "Auto" to allow BIOS to auto detect hard

disk drive support. Select "Disabled" to prevent AMI BIOS from using the

S.M.A.R.T. Select "Enabled" to allow AMI BIOS to use the S.M.A.R.T. to sup-

port hard drive disk. The options are Disabled, Enabled, and Auto.

32-Bit Data Transfer

Select "Enabled" to activate the function of 32-Bit data transfer. Select "Dis-

abled" to deactivate the function. The options are Enabled and Disabled.

IDE Detect Timeout (Sec)

Use the +/- keys to adjust and select the time out for detecting ATA/ATAPI

devices. The default value is 35.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 91 92

Sem comentários

Supermicro 1012C-MRF Manual do Utilizador Página 76