Supermicro 1012C-MRF Manual do Utilizador descarregar pdf (Página 74)

7-6

A+ Server 1012C-MRF User's Manual

 ECC Conﬁ guration

ECC Mode

This submenu affects the DRAM scrub rate based on its setting. Options

include Disabled, Basic, Good, Super, Max and User. Selecting User

activates the other options for user setting.

DRAM ECC Enable

This setting allows hardware to report and correct memory errors au-

tomatically, maintaining system integrity. Options are Enabled or Dis-

abled. This is option is only active if ECC Mode above is set to User.

 DRAM Timing Conﬁ guration

DRAM Timing Conﬁ g

This option allows you to set the DRAM timing conﬁ guration for the system.

Options include Auto or Manual.

IOMMU

This setting is used to enable or disable or set the GART size in systems without

AGP. Options include Enabled and Disabled.

OHCI/EHCI HC Device Functions

These settings allow you to either Enable or Disable functions for OHCI or EHCI

bus devices.

USB 2.0 Controller Mode

Use this setting to conﬁ gure the USB 2.0 Controller in either Hi-Speed (480

Mps) or Full Speed (12 Mps) mode. Options include Enabled (Hi-Speed Mode)

or Disabled (Full Speed Mode).

Legacy USB Support

Select "Enabled" to enable the support for USB Legacy. Disable Legacy support

if there are no USB devices installed in the system. "Auto" disabled Legacy

support if no USB devices are connected. The options are Disabled, Enabled

and Auto.

Route Port 80h Cycles To

This option allows you to set route 80h cycles to either PCI or LPC.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 91 92

Sem comentários

Supermicro 1012C-MRF Manual do Utilizador Página 74