Supermicro SYS-7046A-6 Manual do Utilizador descarregar pdf (Página 37)

Chapter 5: Advanced Serverboard Setup

5-5

5-5 Processor and Heatsink Installation

When handling the processor package, avoid placing direct pressure on

the label area of the fan.

Notes:

Always connect the power cord last and always remove it before adding, re-

•

moving or changing any hardware components. Make sure that you install the

processor into the CPU socket before you install the CPU heatsink.

If you buy a CPU separately, make sure that you use an Intel-certiﬁ ed multi-

•

directional heatsink only.

Make sure to install the serverboard into the chassis before you install the CPU

•

heatsinks.

When receiving a serverboard without a processor pre-installed, make sure that

•

the plastic CPU socket cap is in place and none of the socket pins are bent;

otherwise, contact your retailer immediately.

Refer to the Supermicro web site for updates on CPU support.

•

Press the socket clip to release 1.

the load plate, which covers the

CPU socket, from its locking

position.

Socket Clip

Load Plate

Gently lift the socket clip to 2.

open the load plate.

Hold the plastic cap at its north 3.

and south center edges to re-

move it from the CPU socket.

Plastic Cap

Hold the north & south edges of

the plastic cap to remove it

Installing an LGA 1366 Processor

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 97 98

Sem comentários

Supermicro SYS-7046A-6 Manual do Utilizador Página 37