Supermicro CSE-113TQ-563CB Manual do Utilizador descarregar pdf (Página 29)

5-5

Chapter 5 Chassis Setup and Maintenance

5-5 DVD-ROM Drive Installation

The SC113 chassis models include a DVD-ROM, which is usually pre-installed.

Installing or Replacing a DVD-ROM Drive

Power down the system and if necessary, remove the server from the rack 1.

and pull the mini-bezel (grate) from the DVD-ROM drive bay.

Remove the chassis cover.2.

Unplug the drives power and data cables from the motherboard and/or back-3.

plane.

Unlock the mini-bezel lock scew and remove the mini-bezel from the drive 4.

bay. The bezel can be removed by pulling out the hard drive beneath the

DVD-ROM, then pulling the mini-bezel forward.

When installing or removing a DVD-ROM drive, the mini-bezel lock screw 5.

must be removed and the drive tray must be completely seperated from the

chassis.

Remove the DVD-ROM from the drive tray by removing the drive screws, 6.

then secure the replacement DVD-ROM into the drive tray, using the drive

screws.

Reattach the drive tray to the chassis by replacing the mini-bezel lock screw, 7.

and tightening it from inside the chassis.

Figure 5-4: Installing the DVD-ROM Drive

Mini-Bezel

Lock Screw

Drive

Screw

Drive

Screws

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

Sem comentários

Supermicro CSE-113TQ-563CB Manual do Utilizador Página 29