Supermicro SYS-7046GT-TRF Manual do Utilizador descarregar pdf (Página 105)

Chapter 7: BIOS

7-23

Clear BMC System Event Log

Clear BMC System Log

Select OK and press the <Enter> key to clear the BMC system log. Select Cancel

to keep the BMC System log. The options are OK and Cancel.

Caution: Any cleared information is unrecoverable. Make absolutely sure

that you no longer need any data stored in the log before clearing the

BMC Event Log.

XSet LAN Conﬁ guration

Set this feature to conﬁ gure the IPMI LAN adapter with a network address as shown

in the following graphics.

Channel Number

Enter the channel number for the SET LAN Conﬁ g command.

Channel Number Status

This feature returns the channel status for the Channel Number selected above:

"Channel Number is OK" or "Wrong Channel Number".

XIP Address Conﬁ guration

Parameter Selector

This item displays the parameter of your IP Address conﬁ guration.

IP Address Source

Select the source of this machine's IP address. If Static is selected, you will need

to know and enter manually the IP address of this machine below. If DHCP is

selected, the BIOS will search for a DHCP (Dynamic Host Conﬁ guration Protocol)

server in the network it is attached to, and request the next available IP address.

The options are DHCP and Static.

IP Address

This item displays the IP address for the IPMI connection detected.

XSubnet Mask Conﬁ guration

Subnet masks tell the network which subnet this machine belongs to. The value

of each three-digit number separated by dots should not exceed 255.

Parameter Selector

Use this feature to select the parameter of your Subnet Masks conﬁ guration.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 119 120

Sem comentários

Supermicro SYS-7046GT-TRF Manual do Utilizador Página 105