Supermicro SuperServer 7036A-T Manual do Utilizador descarregar pdf (Página 63)

Chapter 6: Advanced Chassis Setup

6-9

6-5 Power Supply

The 7036A-T has a single 665W high-efﬁ ciency power supply that features noise-

suppression technology for silent operation. The power supply has the capability to

automatically sense and operate with an input voltage of 100 or 240V AC.

Replacing the Power Supply

To replace the power supply, begin by powering down the system1.

Remove the left chassis cover to access the power supply for removal.2.

Unplug the power cord from the power supply. Then remove the power supply 3.

connectors going to the motherboard and the SATA backplane.

Remove the screws that secure the unit to the mounting brackets in the chas-4.

sis and then pull the unit completely out.

Replace the failed power supply with another having the exact same part 5.

number (PWS-665-PQ). Gently but ﬁ rmly push the new unit all the way into

the open bay.

Secure it to the mounting brackets in the chassis with the screws provided. 6.

Connect two power cables to the SATA backplane and two to the mother-7.

board power connectors.

Finish by replacing the chassis left cover and then restoring power to the 8.

system.

Figure 6-5. Adding a Component Without a Drive Carrier

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 95 96

Sem comentários

Supermicro SuperServer 7036A-T Manual do Utilizador Página 63