Supermicro A+ Server 1020A-T, Beige Manual do Utilizador descarregar pdf (Página 54)

100

5-20

A+ Server 1020A-T User's Manual

VGA Enable/Disable

JPG1 allows you to enable or disable

the VGA port. The default position is

on pins 1 and 2 to enable VGA. See

the table on the right for jumper set-

tings.

JLAN1/2 Enable/Disable

Change the setting of jumper JPL

to enable or disable the JLAN1 and

JLAN2 Gb Ethernet ports. See the

table on the right for jumper settings.

The default setting is enabled

JLAN1/2 Enable/Disable

Jumper Settings (JPL)

Jumper Setting Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

VGA Enable/Disable

Jumper Settings (JPG1)

Jumper Setting Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

C to PCI Enable/Disable

C1/2 pair of jumpers allow you to

connect the System Management Bus

to any one of the PCI slots. The default

setting is closed (on) for both jumpers

to enable the connection. Both con-

nectors must have the same setting

(JI

C1 is for data and JI

C2 is for the

clock). See the table on right for pin

deﬁ nitions.

C to PCI Enable/Disable

Jumper Settings

(JI

C1/2)

Jumper Setting Deﬁ nition

Closed Enabled

Open Disabled

SATA Controller Enable/

Disable (H8DAR-T)

Jumper JPS1 is used to enable or dis-

able the onboard Serial ATA controller.

The default setting is on pins 1-2 to en-

able SATA. See the table on right for

pin deﬁ nitions.

SATA Enable/Disable

Jumper Settings (JPS1)

Both Jumpers Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 99 100

Comentários a estes Manuais

Sem comentários

Supermicro A+ Server 1020A-T, Beige Manual do Utilizador Página 54

Comentários a estes Manuais

Manuais e produtos relacionados com Servidor barebones Supermicro A+ Server 1020A-T, Beige