Supermicro 5017C-TF Manual do Utilizador descarregar pdf (Página 26)

3-2

SUPERSERVER 5017C-TF User's Manual

3-3 Control Panel LEDs

The control panel located on the front of the chassis has ﬁ ve LEDs. These LEDs

provide you with critical information related to different parts of the system. This

section explains what each LED indicates when illuminated and any corrective ac-

tion you may need to take.

Overheat/Fan Fail

When this LED ﬂ ashes, it indicates a fan failure. When on continuously it indicates

an overheat condition, which may be caused by cables obstructing the airﬂ ow in

the system or the ambient room temperature being too warm. Check the routing of

the cables and make sure all fans are present and operating normally. You should

also check to make sure that the chassis covers are installed. Finally, verify that

the heatsinks are installed properly (see Chapter 5). This LED will remain ﬂ ashing

or on as long as the indicated condition exists.

NIC2

Indicates network activity on LAN2 when ﬂ ashing .

NIC1

Indicates network activity on LAN1 when ﬂ ashing.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 93 94

Sem comentários

Supermicro 5017C-TF Manual do Utilizador Página 26