Supermicro SuperWorkstation 5037A-i Manual do Utilizador descarregar pdf (Página 40)

5-18

SuperWorkstation 5037A-I User's Manual

Fan Header

Pin Denitions

Pin# Denition

1 Ground (Black)

2 +12V (Red)

3 Tachometer

4 PWM_Control

Fan Headers (FAN1~4, FANA)

The X9SRA motherboard series has ve

fan headers (Fan 1~Fan 4 and Fan A).

These fans are 4-pin fan headers. Pins

1-3 of these fan headers are backward

compatible with the traditional 3-pin fans.

However, the fan speed control setting in

the BIOS Hardware Monitoring section

will only work with 4-pin fans. This allows

the BIOS to automatically set fan speeds

based on the system temperature. Refer to

the table on the right for pin denitions and

fan usage. We recommend that 4-pin fans

are used on the motherboard.

Fan Usage

FAN# Use for

1~4 System/CPU

A I/O Cards

Speaker (JD1)

On the JD1 header, Pins 3~4 are used for

the internal speaker. Close Pins 3~4 with a

jumper or cap to use the onboard speaker.

If you wish to use an external speaker, at-

tach the external speaker's cable to Pins

1~4. See the table on the right for pin

denitions.

Speaker Connector

Pin Denitions

Pin Setting Denition

Pins 3~4 Internal Speaker

Pins1~4 External Speaker

Power LED

The Power LED connection is located on

pins 15 and 16 of JF1. Refer to the table

on the right for pin denitions.

Power LED

Pin Denitions (JF1)

Pin# Denition

15 LED VCC

16 Ground

Chassis Intrusion (JL1)

A Chassis Intrusion header is located at

JL1 on the motherboard. Attach the ap-

propriate cable from the chassis to inform

you of a chassis intrusion when the chassis

is opened.

Chassis Intrusion

Pin Denitions (JL1)

Pin# Denition

1 Intrusion Input

2 Ground

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 101 102

Comentários a estes Manuais

Sem comentários