Supermicro AOC-CGP-I2 Guia do Utilizador descarregar pdf (Página 16)

3-4

AOC-CGP-i2 Add-on Card User's Guide

3. Click on INSTALL DRIVERS AND SOFTWARE.

4. Follow the prompts to complete the installation.

3-6 Installing the Linux Operating System

Follow the steps below to install the driver to a Linux system.

Build a Binary RPM Package

1. Run ‘rpmbuild -tb <lename.tar.gz>’

2. Replace <lename.tar.gz> with the specic lename of the driver.

Note: For the build to work properly, the current running kernel MUST

match the version and conguration of the installed kernel sources. If you

have just recompiled the kernel, reboot the system at this time.

3-7 Building the Driver Manually

Follow the instructions below to build the driver manually.

1. Move the base driver tar le to the directory of your choice. For example:

/home/username/igb

/usr/local/src/igb

2. Untar/unzip archive, where <x.x.x> is the version number for the driver tar le:

tar zxf igb-<x.x.x>.tar.gz

3. Change to the driver src directory, where <x.x.x> is the version number for

the driver tar:

cd igb-<x.x.x>/src/

1 2 ... 11 12 13 14 15 16 17 18 19

Sem comentários

Supermicro AOC-CGP-I2 Guia do Utilizador Página 16