Supermicro SuperChassis 836BA-R1K28B Manual do Utilizador descarregar pdf (Página 58)

SC836 Chassis Manual

5-14

Replacing the Power Distributor

Redundant server chassis that are 2U or more in height require a power distributor.

The power distributor provides failover and power supply redundancy. In the unlikely

event that the power distributor requires replacement, do following:

Power Distributor Replacement

1. Power down the server and remove the cord from the wall socket or power

strip.

2. Remove all cable connections from the power supply to the motherboard,

backplane, and other components. Also, remove both power supplies from the

chassis.

3. Locate the power distributor between the power supply and the fan row.

4. Remove the three screws securing the power supply.

5. Gently pull the power distributor from the chassis. Make sure to guide all the

cables through the power distributor housing.

6. Slide the new power distributor module into the power distributor housing.

Make that you slide the cables through the bottom of the housing.

7. Reconnect all the power cables, replace the power supply, and plug the

power supply cord into the wall.

Figure 5-9. Replacing the Power Distributor

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 143 144

Sem comentários

Supermicro SuperChassis 836BA-R1K28B Manual do Utilizador Página 58