Supermicro CSE-PTJBOD-CB2 Manual do Utilizador descarregar pdf (Página 19)

SC837J Chassis Manual

3-3

Power: Indicates power is being supplied to the system's power supply units. This

LED should normally be illuminated when the system is operating.

HDD: Indicates IDE channel activity. SAS/SATA drive, and/or DVD-ROM drive

activity when ashing.

NIC1: Indicates network activity on GLAN1 when ashing.

NIC2: Indicates network activity on GLAN2 when ashing.

Overheat/Fan Fail: When this LED ashes, it indicates a fan failure. When con-

tinuously on (not ashing) it indicates an overheat condition, which may be caused

by cables obstructing the airow in the system or the ambient room temperature

being too warm. Check the routing of the cables and make sure all fans are pres-

ent and operating normally. You should also check to make sure that the chassis

covers are installed. Finally, verify that the heatsinks are installed properly. This

LED will remain ashing or on as long as the overheat condition exists.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 75 76

Sem comentários

Supermicro CSE-PTJBOD-CB2 Manual do Utilizador Página 19