Supermicro CSE-847E16-RJBOD1 Manual do Utilizador descarregar pdf (Página 31)

4-11

Chapter 4: Chassis Setup and Maintenance

Expansion Slot Setup in U (Universal Output) Chassis

SC847 U model chassis accepts a slightly smaller "L" shaped motherboard to allow

for a universal expansion card. This universal output card allows the systems to

accept SAS, SCSI, IB, Ethernet, and other types of connections.

SC847 U chassis accepts three full-length, full-height add-on cards and the fourth

slot is used for the UI/O card. It includes a bracket that extends from the fan row to

the back of the chassis. This bracket provides support for the riser card.

Installing a Universal Input/Output Card in the SC847 U Model Chassis

Disconnect the power supply, lay the chassis on a at surface, and open the 1.

chassis cover.

Connect the universal input/output to the motherboard using the slots pro-2.

vided on the motherboard and the back panel.

Secure the card to the chassis using the four screws provided in the chassis 3.

packaging.

The SC847 U model chassis includes three full-height/full-length slots and three

low-prole slots.

Installing Expansion Cards in the SC847 U Chassis

Disconnect the power supply, lay the chassis on a at surface, and open the 1.

chassis cover.

If you are using a universal input/output card, make sure it is installed before 2.

continuing.

If you installing low prole add-on cards, remove the chassis air shroud.3.

Secure the card to the chassis using the four screws provided with the chas-4.

sis packaging.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 127 128

Sem comentários

Supermicro CSE-847E16-RJBOD1 Manual do Utilizador Página 31