Supermicro CSE-825TQ-R720UB Manual do Utilizador descarregar pdf (Página 36)

SC825 Chassis Manual

5-14

Add-on Card/Expansion Slot Setup for SC825U (Universal

Output)

SC825U chassis accept a slightly smaller "L" shaped motherboard to allow for a

universal expansion card. This universal output card allows the systems to accept

SAS, SCSI, IB, Ethernet, and other types of connects.

SC825U chassis are setup similar to 825RC chassis with two differences:

A. The SC825U chassis accepts three full length, full height add-on cards instead

of four. The fourth slot is used for the U I/O card.

B. The SC825U chassis includes a bracket that extends from the fan row to the

back of the chassis. This bracket provides support for the riser card.

Installing a Universal Input/Output Card in the SC825U chassis:

Disconnect the power supply, lay the chassis on a ﬂat surface, and open the

chassis cover.

Connect the universal input/output to the motherboard using the slots pro

vided on the motherboard and the back panel.

Secure the card to the chassis using the four screws provided with the chas

sis packaging.

The SC825U chassis accepts 3 full height/full length slots and 3 low proﬁle slots.

Installing Add-on Cards in the SC825U Chassis

Disconnect the power supply, lay the chassis on a ﬂat surface, and open the

chassis cover.

If you are using a universal input/output card, make sure it is installed before

continuing.

If you installing low proﬁle add-on cards, remove the chassis air shroud.

Secure the card to the chassis using the four screws provided with the chas

sis packaging.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 71 72

Sem comentários

Supermicro CSE-825TQ-R720UB Manual do Utilizador Página 36