Supermicro CSE-213LT-563LPB Manual do Utilizador descarregar pdf (Página 27)

4-7

Chapter 4: Chassis Setup and Maintenance

4-7 Installing the Motherboard

Installing the Motherboard

Review the documentation that came with your motherboard. Become familiar 1.

with component placement, requirements, precautions, and cable connec-

tions.

Open the chassis cover.2.

If necessary, remove the air shroud and riser card bracket.3.

Ensure that the I/O shield has been installed correctly.4.

As required by your motherboard, install standoffs in any areas that do not 5.

have a permanent standoff and remove any standoffs that are not required by

the motherboard.

Lay the motherboard on the chassis aligning the permanent and optional 6.

standoffs

Secure the motherboard to the chassis using the rounded, Phillips head 7.

screws which are included in the motherboard bag of the accessory box. Do

not exceed eight pounds of torque when tightening down the motherboard.

Figure4-7:InstallingtheLowProleMotherboard

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 69 70

Sem comentários

Supermicro CSE-213LT-563LPB Manual do Utilizador Página 27